Tag Error

ATC Error. Exchange arm at 60 degrees input detected, expected exchange arm down input. Enter “ATC & Machine diagnostics” to clear error.

ATC Error. Exchange arm at 60 degrees input detected, expected 0 degrees input. Enter “ATC & Machine diagnostics” to clear error.

ATC Error. Exchange arm at 60 degrees input not detected. Enter “ATC & Machine diagnostics” to clear error.

ATC Error. Both tool holder up and down inputs detected. Enter “ATC & Machine diagnostics” to clear error.

ATC Error. Tool holder down input detected, expected up input. Enter “ATC & Machine diagnostics” to clear error.

ATC Error. Tool holder up input detected, expected down input. Enter “ATC & Machine diagnostics” to clear error.

ATC Error. Tool holder down input not detected. Enter “ATC & Machine diagnostics” to clear error.

ATC Error. Tool holder up input not detected. Enter “ATC & Machine diagnostics” to clear error.

The spindle did not orient. Typically caused by an issue with the spindle enable relay or contactor. If the motor to spindle ratio is not one to one, the proximity switch could have an issue.

Typically caused by a failure with proximity switch or PIN mechanism.