ATC FAULT! MAGAZINE ASSEMBLY NOT HOME WHEN EXPECTED.
Tag Error
FRONT DOORS MUST BE CLOSED BEFORE CYCLING THE PALLET CHANGER. CLOSE DOORS AND PRESS CYCLE START BUTTON TO CONTINUE.
ELECTRICAL CABINET TEMPERATURE HAS EXCEEDED MAXIMUM THRESHOLD! DISABLING CONTROL POWER!!
ELECTRICAL CABINET TEMPERATURE IS BELOW MINIMUM REQUIREMENT! DISABLING CONTROL POWER!!
Typically caused by an incorrect machine configuration or your machine cabinet may be too low.
SPINDLE TEMPERATURE FAULT. MAX SPINDLE TEMPERATURE HAS BEEN EXCEEDED. LET SPINDLE COOL DOWN BEFORE USING.
Typically caused by the machine cabinet over heating or an incorrect machine configuration is being used.
ATC MAGAZINE FAULT. MAGAZINE RE-CALIBRATE ATTEMPT FAILED. ENTER ATC DIAGNOSTICS TO CLEAR ERROR.
Your magazine failed to recalibrate. Typically caused by an issue with the magazine end position sensors.
Z-AXIS STOP POSITION TOLERANCE EXCEEDED DURING TOOL CHANGE.
TOOL PROBE BATTERY IS LOW.
TOOL PROBE FAULT. UNABLE TO RECEIVE OPTICAL SIGNAL.
SPINDLE ORIENT POSITION MOVE ERROR.
