ENCODER DEVICE 0: CHANNEL 2 ALARM: {0}
Tag Error
ENCODER DEVICE 0: CHANNEL 1 ALARM: {0}
ENCODER DEVICE 0: CHANNEL 0 ALARM: {0}
ATC ERROR! THE “ATC ARM AT MAGAZINE POSITION” AND “ATC ARM AT OR NEAR SPINDLE ENGAGEMENT AREA” SENSORS BOTH DETECTED. ENTER ATC DIAGNOSTICS “ATC I/O STATUS SCREEN” TO VERIFY I/O STATUS. IF BOTH SWITCHES ARE “ON” SWITCHES MUST BE CHECKED AND PROBLEM CORRECTED BEFORE ANY FURTHER MACHINE OPERATION.
ATC ERROR! THE “ATC ARM AT STANDBY POSITION” AND “ATC ARM AT OR NEAR SPINDLE ENGAGEMENT AREA” SENSORS BOTH DETECTED. ENTER ATC DIAGNOSTICS “ATC I/O STATUS SCREEN” TO VERIFY I/O STATUS. IF BOTH SWITCHES ARE “ON” SWITCHES MUST BE CHECKED AND PROBLEM CORRECTED BEFORE ANY FURTHER MACHINE OPERATION.
CALIBRATION ERROR!!! {0:A} AXIS HAS TRAVELED MAX DISTANCE SEARCHING LIMIT
Moved off of the limit switch and did not find the marker pulse in the distance allowed to move from the limit switch. Check the soft limit switch axis parameters or the limit switch parameters.
ATC ERROR! THE “ATC ARM AT STANDBY POSITION” AND “ATC ARM AT SPINDLE POSITION” SENSORS BOTH DETECTED. ENTER ATC DIAGNOSTICS “ATC I/O STATUS SCREEN” TO VERIFY I/O STATUS. IF BOTH SWITCHES ARE “ON” SWITCHES MUST BE CHECKED AND PROBLEM CORRECTED BEFORE ANY FURTHER MACHINE OPERATION.
ATC ERROR! THE “ATC ARM AT MAGAZINE POSITION” AND “ATC ARM AT SPINDLE POSITION” SENSORS BOTH DETECTED. ENTER ATC DIAGNOSTICS “ATC I/O STATUS SCREEN” TO VERIFY I/O STATUS. IF BOTH SWITCHES ARE “ON” SWITCHES MUST BE CHECKED AND PROBLEM CORRECTED BEFORE ANY FURTHER MACHINE OPERATION.
ATC ERROR! THE “ATC ARM AT MAGAZINE POSITION” AND “ATC ARM AT STANDBY POSITION” SENSORS BOTH DETECTED. ENTER ATC DIAGNOSTICS “ATC I/O STATUS SCREEN” TO VERIFY I/O STATUS. IF BOTH SWITCHES ARE “ON” SWITCHES MUST BE CHECKED AND PROBLEM CORRECTED BEFORE ANY FURTHER MACHINE OPERATION.
OPEN ROOF DOOR HAS BEEN DETECTED. CLOSE ROOF DOOR TO CONTINUE OPERATION.
Close the roof door.