ATC ERROR – MAGAZINE ROTATE SWITCH UNDERCOUNT.
ATC Error – Magazine rotate switch undercount.
Tag Error
ATC ERROR – POCKET-TO-POCKET TIMEOUT FAULT!
ATC Error – Pocket-to-pocket timeout fault.
ATC ERROR – SPINDLE CLAMP/UNCLAMP TIMEOUT FAULT
The spindle was commanded to clamp/unclamp but the sensor was not seen in the time allotted. Possible causes include a hydraulic or pneumatic error depending on the type of clamping system or the sensors have malfunctioned or are not aligned…
ATC ERROR – Z AXIS FAILED TO REACH TOOL CHANGE HEIGHT
Z-axis did not reach the tool change height.
ATC ERROR – Z AXIS FAILED TO REACH RETRACT HEIGHT
Z-axis did not reach retract height.
ATC ERROR – MAGAZINE PIN DID NOT UNLOCK!
Message is in response to failed steps during either a tool change or a requested action as part of Diagnostics.
ATC ERROR – MAGAZINE PIN DID NOT LOCK!
Message is in response to failed steps during either a tool change or a requested action as part of Diagnostics.
FIXTURE MOVE FAULT – SPINDLE DID NOT UNCLAMP.
Fixture Move Fault – Spindle did not unclamp.
FIXTURE MOVE FAULT – SPINDLE NOT ORIENTED !
Fixture Move Fault – spindle not oriented.
FIXTURE MOVE FAULT – X,Y AXES DID NOT CLEAR !
Fixture Move Fault – X, Y Axes did not clear.